The word hybrid seems to be the hot topic in the automotive industry in the last 5 years. Apart from producing daily run about hybrid cars the car makers have started to develop Hybrid Sports cars. Not all car makers have gone down this path but many are already working on a development car of some sort. The question is whether this is just a trend or is it really here to stay?!
Here are some examples of currently under development hybrid sports cars / super cars:
- Toyota / Lexus - the next super car (not the LFA) is going to be a hybrid. Supposedly to be a Supra replacement but nothing can be confirmed at the moment. Toyota has been seen testing their hybrid motor in Le Mans which could mean that it may be included in their new super car.
- Honda - The new NSX is expected to have 3 electric motors, 1 for each front wheel and 1 main unit that works with engine. The concept has been displayed since 2011 but there are no official release dates at the moment.
- Porsche - The new 918 is expected to be one of the most powerful hybrids. The prototype of this model has been seen under testing phase.
- Ferrari - now working on a new a hybrid super car. Expected to be launched in 2014.
Sports cars / super cars are often regarded as the show piece of an automotive manufacturer and they would usually pour all their resources to make the car the best that it can be. Having a hybrid sports car / super car seems like a big juggling act because on one hand the car is expected to be as powerful as possible and yet the hybrid system is trying to make it as fuel efficient as possible. Power comes at a cost in terms of fuel. With the hybrid system the extra power and torque boost will come from the electric motor however this cost comes in the form of weight of the batteries. Hybrid batteries are notoriously heavy and this has an impact on performance as well as the balance of the car which in turn will effect the handling.
In some cases the hybrid motor only acts as a performance booster.
Right now there are no hybrid super cars available yet. Once the first one is officially launched, we shall then be able to see how well it stacks up against traditional super cars with only a combustion engine.
We have seen electric sports cars like the Tesla and Fisker. These are different from the hybrid super cars that Toyota, Honda, Porsche and Ferrari are developing.
Friday, 17 August 2012
Thursday, 16 August 2012
Car manufacturer's sense of responsibility towards consumers
Every now and then we see car manufacturers make recalls for cars to rectify problems that they discover in their cars after the cars have been sold to customers. No car maker is immune to this as the production process and sourcing of parts from a large number of suppliers make it virtually impossible have full control of quality. Naturally, car manufacturers will put a lot of emphasis to ensure that the components and parts are up to their expectation and are sufficiently tested. Occasionally the testing is insufficient and flaws start to appear causing problems or premature failure of the component.
Each car having hundreds of thousands of parts, some moving and some static means that to ensure optimum quality the stringent evaluation process has to start very early during the new model development phase. Even simple items such as carpets and floor mats have to be designed and tested but yet occasional problems occur like in the recent case of floor mats for the Mercedes M Class sold in US.
Large car companies such as Lexus, Toyota, Honda, Nissan, Ford, Mercedes, BMW and Porsche are quick to acknowledge problem when it arises and will quickly issue recalls to rectify the problems. This cannot be said for companies such as Proton which has over time produced shoddy quality cars which they take no responsibility to rectify. The very common case was the exploding front windscreen for car assembled before year 2000. The front windscreens were not laminated and numerous cases of exploding windscreens were reported after the cars were parked under the hot sun. Some cases happened when the cars were being driven on the road. Other common issues were the power windows that wouldn't close or jammed while being closed. This led to many Proton owners opting not to open the windows but to open their doors instead to take parking tickets or pay tolls. Proton did not issue a recall on this and left thousands of Proton owners in a lurch. Having this kind of attitude it is little wonder why the average Malaysian who can afford to buy a car other car Proton will immediately buy a non-Proton car.
Some car makers will even shun warranty claims. In a recent case in UK, a lady owner of a Hyundai i20 wanted to claim warranty for the replacement clutch for a 4 month old car. Hyundai in UK did not acknowledge that it was a problem with the component and denied the warranty claim considering it as a wear and tear item. Under normal usage, it is almost impossible to completely wear out a clutch in 4 months and Hyundai demonstrated that they lacked the responsibility towards the customer. All this when it hits the media is bad press for Hyundai. Hyundai should have investigated when the clutch was worn out in 4 months and check the quality of the component with their supplier or manufacturing arm. Such bad press will not bode well for reputation and also it quickly can turn ugly especially when it will cause potential customers to lose confidence in their warranty system.
Having the right sense of responsibility towards the customer makes a huge impact on repeat sales. Customers in general can accept the odd recall and that the car maker was responsible enough to acknowledge the problem and take the action to rectify it. The customers would likely return to buy another car from the same car maker (if the ownership experience is satisfactory). Margins for selling cars these days have dropped tremendously with fierce competition and rising manufacturing costs. Customer retention is now more important than ever before.
Each car having hundreds of thousands of parts, some moving and some static means that to ensure optimum quality the stringent evaluation process has to start very early during the new model development phase. Even simple items such as carpets and floor mats have to be designed and tested but yet occasional problems occur like in the recent case of floor mats for the Mercedes M Class sold in US.
Large car companies such as Lexus, Toyota, Honda, Nissan, Ford, Mercedes, BMW and Porsche are quick to acknowledge problem when it arises and will quickly issue recalls to rectify the problems. This cannot be said for companies such as Proton which has over time produced shoddy quality cars which they take no responsibility to rectify. The very common case was the exploding front windscreen for car assembled before year 2000. The front windscreens were not laminated and numerous cases of exploding windscreens were reported after the cars were parked under the hot sun. Some cases happened when the cars were being driven on the road. Other common issues were the power windows that wouldn't close or jammed while being closed. This led to many Proton owners opting not to open the windows but to open their doors instead to take parking tickets or pay tolls. Proton did not issue a recall on this and left thousands of Proton owners in a lurch. Having this kind of attitude it is little wonder why the average Malaysian who can afford to buy a car other car Proton will immediately buy a non-Proton car.
Some car makers will even shun warranty claims. In a recent case in UK, a lady owner of a Hyundai i20 wanted to claim warranty for the replacement clutch for a 4 month old car. Hyundai in UK did not acknowledge that it was a problem with the component and denied the warranty claim considering it as a wear and tear item. Under normal usage, it is almost impossible to completely wear out a clutch in 4 months and Hyundai demonstrated that they lacked the responsibility towards the customer. All this when it hits the media is bad press for Hyundai. Hyundai should have investigated when the clutch was worn out in 4 months and check the quality of the component with their supplier or manufacturing arm. Such bad press will not bode well for reputation and also it quickly can turn ugly especially when it will cause potential customers to lose confidence in their warranty system.
Having the right sense of responsibility towards the customer makes a huge impact on repeat sales. Customers in general can accept the odd recall and that the car maker was responsible enough to acknowledge the problem and take the action to rectify it. The customers would likely return to buy another car from the same car maker (if the ownership experience is satisfactory). Margins for selling cars these days have dropped tremendously with fierce competition and rising manufacturing costs. Customer retention is now more important than ever before.
Monday, 13 August 2012
electric cars... are they really practical?
Electric cars seem to be the buzz these days in the motoring media. Nissan has the Leaf model, Hyundai has the Elantra EV, Mitsubishi has their Miev and etc. The real question is whether these models are really practical in daily use conditions. Lets consider the strengths and weaknesses of the electric car.
Strength:
Good instant torque and power for brisk acceleration. Will be able to move 3 passengers and 1 driver with ease since the torque available is higher than a small capacity combustion engine.
Weakness:
Very short driving range which limits the distance the electric car can travel on a single charge. Can be very annoying to have to charge the car every 150km if you are planning traveling 400km.
Based on the strengths and weaknesses lets consider how it will fair in the two main driving conditions.
City driving:
the stop-go traffic conditions and short traveling distance is good for the EV since the EV's usual range is not more than 200km. The city is also more sensitive to exhaust emissions and air pollution. If the city is well planned, charging stations will be accessible every 10km to 20km, or car parks may have charging points.
Highway driving:
not suitable since EVs are not good for highway cruising like a diesel engine. EV's range is far too short for long distance driving. With an average range of 200km in a single charge, the short range can be a real bummer for people who want to drive intercity. Most of the electric cars either use a CVT transmission or a single gear transmission which inhibits real high speed driving. Driving at high speeds also drains the battery power very quickly as the single gear transmission will be turning at very high speeds.
In the real world in order for the electric car to be successful they must first address the fundamental issue about driving range. If it is able to achieve a driving range of over 350km on a single charge, it would make a huge difference in terms of overall practicality. The Japanese car makers also need to look at switching to better batteries such as Lithium Ion or Lithium Polymer which are able to hold far more power, more compact and has a better recharge rate than the out of date Nickel Metal Hydride batteries currently used in the Prius and other hybrids.
Strength:
Good instant torque and power for brisk acceleration. Will be able to move 3 passengers and 1 driver with ease since the torque available is higher than a small capacity combustion engine.
Weakness:
Very short driving range which limits the distance the electric car can travel on a single charge. Can be very annoying to have to charge the car every 150km if you are planning traveling 400km.
Based on the strengths and weaknesses lets consider how it will fair in the two main driving conditions.
City driving:
the stop-go traffic conditions and short traveling distance is good for the EV since the EV's usual range is not more than 200km. The city is also more sensitive to exhaust emissions and air pollution. If the city is well planned, charging stations will be accessible every 10km to 20km, or car parks may have charging points.
Highway driving:
not suitable since EVs are not good for highway cruising like a diesel engine. EV's range is far too short for long distance driving. With an average range of 200km in a single charge, the short range can be a real bummer for people who want to drive intercity. Most of the electric cars either use a CVT transmission or a single gear transmission which inhibits real high speed driving. Driving at high speeds also drains the battery power very quickly as the single gear transmission will be turning at very high speeds.
In the real world in order for the electric car to be successful they must first address the fundamental issue about driving range. If it is able to achieve a driving range of over 350km on a single charge, it would make a huge difference in terms of overall practicality. The Japanese car makers also need to look at switching to better batteries such as Lithium Ion or Lithium Polymer which are able to hold far more power, more compact and has a better recharge rate than the out of date Nickel Metal Hydride batteries currently used in the Prius and other hybrids.
Thursday, 2 August 2012
Fuel Economy claims
When we see new car advertisements in magazines or newspapers often we see claims on fuel economy figures published in bold to attract prospective car buyers. It is good way to promote the car's fuel economy but is it realistic? can it really be matched in the real world?
Japan and Europe each have their own way to test fuel economy and will result in different claims. All car manufacturers will naturally try to get the best result possible and publish the lowest figure. However, it is very often that we drive in less than perfect conditions to enable us to match the claimed fuel economy figures as claimed in the publications.
Several key factors contribute to us not be able to match the claimed fuel economy figures:
- using air conditioning
- driving with under inflated tyres (very common problem)
- carrying more weight in your car than you should (meaning you have your golf bag and other items in the trunk)
- driving faster than the ideal fuel economy speed
- getting stuck in heavy traffic often
- high ambient heat
- brisk acceleration
Fuel economy claims should be used as just a rough guide only. It does not necessarily mean that you will be able to achieved the claimed fuel economy. In an ideal world with ideal conditions there is the possibility of achieving the claimed figures but we don't live in an ideal world with ideal driving conditions.
Honda in US was recently sued over false fuel economy claims. The fuel economy claims were far lower than what was actually achievable by an ordinary driver. This law suit set an example and a warning to car manufacturers to not simply claim fuel economy figures and only state a realistic fuel economy figure. To be fair to the motoring public, only a very small percentage of drivers will even attempt to drive according to best fuel economy practices on a daily basis.
Japan and Europe each have their own way to test fuel economy and will result in different claims. All car manufacturers will naturally try to get the best result possible and publish the lowest figure. However, it is very often that we drive in less than perfect conditions to enable us to match the claimed fuel economy figures as claimed in the publications.
Several key factors contribute to us not be able to match the claimed fuel economy figures:
- using air conditioning
- driving with under inflated tyres (very common problem)
- carrying more weight in your car than you should (meaning you have your golf bag and other items in the trunk)
- driving faster than the ideal fuel economy speed
- getting stuck in heavy traffic often
- high ambient heat
- brisk acceleration
Fuel economy claims should be used as just a rough guide only. It does not necessarily mean that you will be able to achieved the claimed fuel economy. In an ideal world with ideal conditions there is the possibility of achieving the claimed figures but we don't live in an ideal world with ideal driving conditions.
Honda in US was recently sued over false fuel economy claims. The fuel economy claims were far lower than what was actually achievable by an ordinary driver. This law suit set an example and a warning to car manufacturers to not simply claim fuel economy figures and only state a realistic fuel economy figure. To be fair to the motoring public, only a very small percentage of drivers will even attempt to drive according to best fuel economy practices on a daily basis.
Wednesday, 25 July 2012
Performance air filters vs original paper air filters
Car owners who love extra performance will often explore getting more power via an air filter upgrade as it is commonly believed that a faster flowing air filter will yield more power. More air entering the engine at a faster speed does help improve combustion which in turn helps to increase power. However not all after market performance air filters live up to their expectations. Switching to after market performance air filters can yield up to 10hp for certain vehicles while others may yield only 1 or 2 hp. Turbo charged and super charged engines will benefit the most from higher flow air filters as forced induction needs fast flowing air supply. For naturally aspirated engines swapping to higher flow performance air filters will only yield at most 3hp as the nature of the engine can only benefit a limited amount of extra air.
When people talk about performance air filters most layman who knows a thing or two about car performance parts will know K&N. It is by far the most well known after market air filter brand in the world.
It is without a doubt good product but it is only good when it is brand new. Its concept of using a cotton based air filter is definitely better than the original factory fitted paper air filter which is not washable and is easily clogged. K&N air filters offer good filtration and coupled with the fact that it is made from cotton it is a lot more durable and last much longer than any paper air filter. The problem with K&N air filters come when you have to wash it and re-oil it. K&N uses oil to trap the finer particles of dust that the cotton filter may not trap. The oil has its advantages and disadvantages. Advantage is when the air filter is brand new, the oil is very effective in trapping dust and the oil is evenly applied at the factory. The big disadvantage is when you wash it and have to re-apply the oil which done by hand is extremely difficult to apply evenly. Lumps of oil will congregate at certain parts of the air filter and most people will apply too much oil which leads to blockage of the air filter and also over time it will foul up the air mass sensor.
Other variants of performance air filters are also available such as sponge or stainless steel. The famous sponge type air filter is available from HKS and Piper Cross. The sponge filters do not last as long as cotton as once it gets wet, it will break into tiny bits over time and enter the engine which can potentially cause problems to the engine.
The last variant is the stainless steel type which is far more durable than all other earlier types but is more expensive and needs regular cleaning for optimum performance. Stainless steel type of air filter is quite rare and only a small handful of manufacturers produce this type of air filter.
Air filter shape and design also plays a part in performance of the engine. A typical engine will usually have a flat panel air filter and after market suppliers offer cone or cylindrical type air filters. It is not guaranteed that upgrading to a cylindrical or cone type air filter will yield the necessary power gains as expected. For certain cars such as the VW Golf Gti, changing the original flat panel air filter to the cylindrical type will see power loss at low RPM as the absence of the air filter box means that when the throttle is open, there is no immediate air available and the air filter has to suck in air to feed the engine. This causes a lag and low end response suffers. The cylindrical type air filter in this case will only yield power gains at higher RPM.
When people talk about performance air filters most layman who knows a thing or two about car performance parts will know K&N. It is by far the most well known after market air filter brand in the world.
It is without a doubt good product but it is only good when it is brand new. Its concept of using a cotton based air filter is definitely better than the original factory fitted paper air filter which is not washable and is easily clogged. K&N air filters offer good filtration and coupled with the fact that it is made from cotton it is a lot more durable and last much longer than any paper air filter. The problem with K&N air filters come when you have to wash it and re-oil it. K&N uses oil to trap the finer particles of dust that the cotton filter may not trap. The oil has its advantages and disadvantages. Advantage is when the air filter is brand new, the oil is very effective in trapping dust and the oil is evenly applied at the factory. The big disadvantage is when you wash it and have to re-apply the oil which done by hand is extremely difficult to apply evenly. Lumps of oil will congregate at certain parts of the air filter and most people will apply too much oil which leads to blockage of the air filter and also over time it will foul up the air mass sensor.
Other variants of performance air filters are also available such as sponge or stainless steel. The famous sponge type air filter is available from HKS and Piper Cross. The sponge filters do not last as long as cotton as once it gets wet, it will break into tiny bits over time and enter the engine which can potentially cause problems to the engine.
The last variant is the stainless steel type which is far more durable than all other earlier types but is more expensive and needs regular cleaning for optimum performance. Stainless steel type of air filter is quite rare and only a small handful of manufacturers produce this type of air filter.
Air filter shape and design also plays a part in performance of the engine. A typical engine will usually have a flat panel air filter and after market suppliers offer cone or cylindrical type air filters. It is not guaranteed that upgrading to a cylindrical or cone type air filter will yield the necessary power gains as expected. For certain cars such as the VW Golf Gti, changing the original flat panel air filter to the cylindrical type will see power loss at low RPM as the absence of the air filter box means that when the throttle is open, there is no immediate air available and the air filter has to suck in air to feed the engine. This causes a lag and low end response suffers. The cylindrical type air filter in this case will only yield power gains at higher RPM.
Wednesday, 18 July 2012
Tropicalization of cars
The climate conditions vary severely across the globe and car manufacturers previously made cars for specific countries based on their climate conditions without realizing that with globalization the cars do get exported out from the country where it was originally meant for sale in.
Cars made in Europe used to be designed for European climate which were cooler and dryer than sub tropical Asian countries where temperatures can exceed 40C and have humidity over 80%. The direct impact of exporting a car designed for the European climate to Asia meant that the cars were not able to function at its best. There were many examples of cases where the cars would over heat as the cooling system was not suitable for the sub tropical climate. The radiators were far too small and other components were not able to cope with the high humidity leading to premature failure. Some BMWs, Alfa Romeos and Audis that were imported to Asia from Germany or UK struggled to cope with the heat. Many of these cars could barely travel 100km across an Asian city without overheating.
Some interior components also started to fade and peel off as the coatings and linings were meant for dry climate conditions.
The car manufacturers only realized this in the late 1990s and started to do global scale testing during the development phase.
The global testing meant that the cars would be sent to the Artic circle for extreme cold weather testing, Arizona desert for extreme heat testing and also to sub tropical countries like Thailand for high humidity testing. The car manufacturer will produce standard specification cars that will allow it to be sold globally and would not risk premature component failure.
In Asian countries where heat and humidity is high, the other condition to take into consideration is traffic congestion. Traffic congestion means that the car would experience greater heat that normal as the car is not moving and very little air is passed through the radiator. The radiator fan and the cooling system has to be sufficient to cope with the high temperatures. Furthermore the air conditioner load on the engine also adds further stress.
The Asian weather also is notorious for thunder storms where huge volumes of rain water can suddenly appear in a very short space of time. The car's engine components also need to be able to cope with sudden changes in temperature from extreme heat over 40C and a sudden cooling to 24C. Components that are not designed to handle such sudden temperature changes will fail very quickly. The humidity aspect also play a huge impact on the electronics. It is extremely difficult to completely isolate electronic component from humidity.
Till today some car companies still struggle to truly tropicalize their cars and do sufficient aging tests to handle humidity. Humidity is a silent killer as the moisture slowly creeps into the components and premature aging will appear within 3 years instead of the intended 5 years.
Tropicalization is not just for car components but also tyres. Previously tyres from Europe struggled in extreme heat and humid conditions in Asia. Many started to blister after only 6 months of use.
Globalization means that almost everything can be sold and shipped across the globe easily, tropicalization has become very important aspect of car design and manufacturing.
Cars made in Europe used to be designed for European climate which were cooler and dryer than sub tropical Asian countries where temperatures can exceed 40C and have humidity over 80%. The direct impact of exporting a car designed for the European climate to Asia meant that the cars were not able to function at its best. There were many examples of cases where the cars would over heat as the cooling system was not suitable for the sub tropical climate. The radiators were far too small and other components were not able to cope with the high humidity leading to premature failure. Some BMWs, Alfa Romeos and Audis that were imported to Asia from Germany or UK struggled to cope with the heat. Many of these cars could barely travel 100km across an Asian city without overheating.
Some interior components also started to fade and peel off as the coatings and linings were meant for dry climate conditions.
The car manufacturers only realized this in the late 1990s and started to do global scale testing during the development phase.
The global testing meant that the cars would be sent to the Artic circle for extreme cold weather testing, Arizona desert for extreme heat testing and also to sub tropical countries like Thailand for high humidity testing. The car manufacturer will produce standard specification cars that will allow it to be sold globally and would not risk premature component failure.
In Asian countries where heat and humidity is high, the other condition to take into consideration is traffic congestion. Traffic congestion means that the car would experience greater heat that normal as the car is not moving and very little air is passed through the radiator. The radiator fan and the cooling system has to be sufficient to cope with the high temperatures. Furthermore the air conditioner load on the engine also adds further stress.
The Asian weather also is notorious for thunder storms where huge volumes of rain water can suddenly appear in a very short space of time. The car's engine components also need to be able to cope with sudden changes in temperature from extreme heat over 40C and a sudden cooling to 24C. Components that are not designed to handle such sudden temperature changes will fail very quickly. The humidity aspect also play a huge impact on the electronics. It is extremely difficult to completely isolate electronic component from humidity.
Till today some car companies still struggle to truly tropicalize their cars and do sufficient aging tests to handle humidity. Humidity is a silent killer as the moisture slowly creeps into the components and premature aging will appear within 3 years instead of the intended 5 years.
Tropicalization is not just for car components but also tyres. Previously tyres from Europe struggled in extreme heat and humid conditions in Asia. Many started to blister after only 6 months of use.
Globalization means that almost everything can be sold and shipped across the globe easily, tropicalization has become very important aspect of car design and manufacturing.
Sunday, 15 July 2012
Big brand tyres vs smaller brand tyres
Buying tyres can be a difficult task if you are on a budget and want to get the best for your money. Buying a branded tyre usually cost a lot more than less well known brands. The reason for this is the big brands invest heavily in motor sports sponsorship and their numerous marketing campaigns world wide. This indirectly effect the cost of the tyres. This was particularly evident for Michelin and Bridgestone when they were involved in Formula One. Motor sports is used as part of tyre development as well as marketing but the costs involved are trickled down to the consumer.
Buying famous brand tyres may not necessarily mean that you are buying the best. There have been cases where famous brands produce tyre models that are not as good as expected. The reason for this is unknown. An example is Michelin where their Pilot Sport Preceda 2 was a better performing tyre than the successor which was more expensive and based on driver feedback, they all preferred the Pilot Sport Preceda 2 for it outright grip in the wet and dry and steering feel.
Big brands such as Michelin, Pirelli, Bridgestone, Continental, Yokohama, Goodyear and Dunlop are now being challenged by smaller brands that offer similar quality and similar performance tyres for less money. Brands such as Kumho, Hankook, Federal, Maxxis, Cooper and GT Radial have all taken significant bites out of the market share of the big brands. This is especially so when the gloomy economic situation makes the consumers more conscious about their spending.
In a recent tyre review, the GT Radial HPY model out performed Yokohama, Falken and several other more established tyre brands in a series of tyre tests. The price of this tyre was 30% cheaper than the competing brands. This basically makes it a good choice as a replacement tyre with better performance at a cheaper price.
The price different between a big brand tyre versus a smaller brand can be as much as 50%. This has a direct impact on buyer's choice. The smaller brands have seen significant growth especially with the current economic situation more consumers are willing to try smaller brand tyres. Once they try the smaller brand tyres and find the performance acceptable the consumer is very likely to stay with the smaller brand as it offer better value for money. Saying this, it won't put big brand tyres out of business but on the replacement market the big brands will lose more and more market share to the smaller brands. The big brands will still take the lead as the OE tyre supplier to car manufacturers based on reputation and history.
Recently we have even seen owners of Mercedes Benz S-Class using tyres made by Nexen or Hankook. Changing to smaller brand tyres is no shame and it is by no means a poorer tyre choice. The technological difference is not as big as it once were. Many engineers from established tyre companies are often recruited by smaller tyres companies to learn trade secrets.
Die hard fans of certain brands will not change and will be loyal to specific brands based on historical experiences and brand pedigree.
Buying famous brand tyres may not necessarily mean that you are buying the best. There have been cases where famous brands produce tyre models that are not as good as expected. The reason for this is unknown. An example is Michelin where their Pilot Sport Preceda 2 was a better performing tyre than the successor which was more expensive and based on driver feedback, they all preferred the Pilot Sport Preceda 2 for it outright grip in the wet and dry and steering feel.
Big brands such as Michelin, Pirelli, Bridgestone, Continental, Yokohama, Goodyear and Dunlop are now being challenged by smaller brands that offer similar quality and similar performance tyres for less money. Brands such as Kumho, Hankook, Federal, Maxxis, Cooper and GT Radial have all taken significant bites out of the market share of the big brands. This is especially so when the gloomy economic situation makes the consumers more conscious about their spending.
In a recent tyre review, the GT Radial HPY model out performed Yokohama, Falken and several other more established tyre brands in a series of tyre tests. The price of this tyre was 30% cheaper than the competing brands. This basically makes it a good choice as a replacement tyre with better performance at a cheaper price.
The price different between a big brand tyre versus a smaller brand can be as much as 50%. This has a direct impact on buyer's choice. The smaller brands have seen significant growth especially with the current economic situation more consumers are willing to try smaller brand tyres. Once they try the smaller brand tyres and find the performance acceptable the consumer is very likely to stay with the smaller brand as it offer better value for money. Saying this, it won't put big brand tyres out of business but on the replacement market the big brands will lose more and more market share to the smaller brands. The big brands will still take the lead as the OE tyre supplier to car manufacturers based on reputation and history.
Recently we have even seen owners of Mercedes Benz S-Class using tyres made by Nexen or Hankook. Changing to smaller brand tyres is no shame and it is by no means a poorer tyre choice. The technological difference is not as big as it once were. Many engineers from established tyre companies are often recruited by smaller tyres companies to learn trade secrets.
Die hard fans of certain brands will not change and will be loyal to specific brands based on historical experiences and brand pedigree.
Subscribe to:
Posts (Atom)

